SinceVision to Showcase High-Precision 3D Sensor Portfolio for Automotive Manufacturing at Advanced Factories 2026

BARCELONA, Spain – April 23, 2026 – SinceVision, a manufacturer of industrial sensor technology and high-speed imaging systems, announced today that it will exhibit at Advanced Factories 2026 from May 5–7 at Fira Barcelona Gran Vía. The company will present its latest 3D laser profilers alongside local partner Vision Advisor, with a focus on live automotive inspection demonstrations at Stand D537 in Hall 2.

Advanced Factories is Europe's leading event for automation, industrial robotics, and Industry 4.0 technologies. This year's edition brings together over 680 exhibiting firms and hosts the largest European congress on digital and sustainable industry. SinceVision's participation highlights the growing demand for reliable, high-speed 3D inspection tools that help automotive manufacturers reduce defects, improve traceability, and maintain tight production tolerances.

Live Demonstrations of Real-World Automotive Applications

Visitors to Stand D537 will see working demonstrations of SinceVision sensor technology solving specific, documented inspection challenges across automotive production lines. The company will feature four application scenarios that represent common pain points in the industry:

1. Tire Character OCR and Tread Inspection 

Using the SRI7400R 3D Laser Profiler, SinceVision demonstrates full tire surface scanning with rotational imaging that eliminates blind spots on curved sidewalls. The system uses a 650 nm red laser optimized for low-reflectivity black rubber and completes full inspection of a 19-inch tire in approximately 0.48 seconds. The solution reads raised sidewall characters and measures tread depth in a single pass, supporting both manufacturing quality control and logistics traceability.

2. Connector Pin Height Detection 

The SRI8060 3D Laser Profiler inspects pin arrays for missing, broken, or misaligned pins before automotive connector insertion. Mounted in a mirror angle configuration to access deep frame openings, the system achieves height difference repeatability of 0.015 mm and completes detection in 1.5 seconds. The 3200-point profile density ensures clear reproduction of fine pin tips.

3. Car Door Gap and Flush Measurement

The SRI7140 Integrated 3D Laser Profiler addresses the limitations of manual gap and flush inspection with robotic integration. The system delivers 0.015 mm flushness precision and 0.09 mm gap precision at scanning rates up to 20 kHz. Its compact design saves 50 percent of installation space, allowing collision-free robotic arm deployment with a 140 mm working distance and 88 mm Z-axis field of view.

4. LiDAR Frame Glue Detection 

Demonstrating ultra-fine repeatability, this application achieves 0.0081 mm maximum static repeatability with 3500 Hz high-speed sampling. The 17.7 mm depth of field and 56 mm per second scanning speed enable clear glue bead imaging across the frame surface.

Technical Capabilities of the SR and SRI Series 

SinceVision's SR and SRI series 3D laser profilers offer X-axis contour point resolution up to 6400 points, Z-axis linearity of ±0.02 percent of full scale, and scanning speeds reaching 67 kHz. These specifications support high-throughput inspection across a wide range of automotive component geometries and surface conditions. The company will also display complementary sensing technologies including high-speed cameras, laser displacement sensors, full-spectrum sensors, and through-beam edge sensors.

Partnering for Local Expertise

SinceVision will exhibit jointly with Vision Advisor, a Barcelona-based technology partner specializing in artificial vision consulting and distribution. Vision Advisor provides local technical support and application expertise to manufacturers across Spain and Southern Europe.

"Automotive manufacturers across Europe are asking for inspection systems that deliver consistent, repeatable results without slowing down production," said Kevin Cheng, Europe Sales Director at SinceVision. "At Advanced Factories, we are showing exactly that. Our 3D sensors are already solving real problems on factory floors, from tire traceability to door gap measurement. We are not talking about future possibilities. We are demonstrating technology that works today. Our team will be available throughout the show for one-on-one consultations, and visitors can pick up a small giveaway at the booth as a thank you for stopping by."

Exhibition Details

Event: Advanced Factories 2026

Dates: May 5–7, 2026

Location: Fira Barcelona Gran Vía, Barcelona, Spain

Hall: 2

Booth: Stand D537

Register for the expo: Advanced Industries Spain 2026

Attendees are invited to schedule a personalized consultation at the booth to discuss specific inspection challenges and see how SinceVision's 3D sensor portfolio can be integrated into existing production environments.

About SinceVision

Founded in 2014, SinceVision is a specialized manufacturer of industrial sensors, high-speed imaging systems, and high-sensitivity cameras. The company's product portfolio includes 3D laser profilers, laser displacement sensors, spectral confocal sensors, color sensors, through-beam edge sensors, and sCMOS cameras. SinceVision serves customers in consumer electronics, automotive manufacturing, lithium battery production, photovoltaics, and scientific research, with solutions that help improve product quality, reduce operational costs, and increase production efficiency.

About Vision Advisor

Vision Advisor is a technology partner serving the artificial vision market in Spain, providing consulting, distribution, and technical support services. The company helps manufacturers implement modern inspection solutions through a collaborative sales model and optimized local support.

Media Contact:

Email Address: info@sincevision.com

Website URL: www.sincevision.com