SD33-195
Reference Distance: 195 mm
Measurement Range: ±99.98 mm
Repeatability: 50 μm
Spot Size: 430 × 2000 μm
Sampling Frequency: 300 / 500 / 1000 / 2000 / 3000 Hz (selectable)
Laser Output Power: 1 mW
Technical specifications
Model | SD33-195 | |
Reference distance (RF) | 195mm | |
Measuring range | ±99.98mm | |
Light source | Light source wavelength | 655nm |
Laser class | Class II | |
Laser output power | 1mW | |
Laser point diameter (Laser dot size)① | Near-end | 230*600μm |
Reference distance | 430*2000μm | |
Far-end | 700*3300μm | |
Repeatability② | 50μm | |
Linearity | ±0.05% F.S. | |
Temperature characteristics | 0.05% F.S./℃ | |
Sampling refresh rate (Hz) | 500/1000/2000/3000Hz (Choose from four levels) | |
I/O | Communication port | 1 RS485 |
Analog output | 1 channel analog output, analog voltage (0~10V) or analog current (4~20mA) Analog voltage or current cannot be switched | |
IO input | 1 channel, supports functions, such as laser shutdown, remote teaching, sampling and holding, single-pulse trigger, zeroing, etc. | |
IO output | 1 channel, determines status of output. | |
Power voltage | DC12-24V±10% | |
Power consumption | 60mA or less (DC 12V).120mA or less (DC24V) | |
Operating temperature | -10-50oC | |
Storage temperature | -20-70oC | |
Working humidity | 35%-85% no condensation or frost | |
ESD protection | Contact discharge 4kV, air discharge 8kV, conforms with IEC61000-4-2 standard | |
EFT protection | Power port 2kV/5 or 100kHz, signal port 1kV/5 or 100kHz, conforms with IEC61000-4-4 | |
Bumps | 500m/s2(approx. 50G), 3 times along the X, Y, and Z axes | |
Vibrations | 10-55Hz, double amplitude 1.5mm along X, Y, and Z axes for 2 hours | |
IP level | IP67, conforms with IEC 60529 standard | |
Dimensions (mm) | 60×50×22 | |
Weight (Including cables) | 120 |