Packaging Label Positioning in Packaging and Printing Industry with SinceVision Color Sensor
Accurate label positioning is critical for ensuring product quality and aesthetic appeal in the Packaging and Printing Industry.
· Misaligned Labels: Improper label placement can reduce brand value and increase waste.
· Environmental Variables: Variations in light, dust, or surface properties can disrupt detection.
· High-Speed Operations: Fast production lines require sensors capable of precise, real-time adjustments.
Physical Picture or Imaging Effect Picture
SinceVision Solution: Color Sensor SS1 Series
Camera Selection
| specification | |||
| Model | SS1-70K5-2M（with cable） | ||
| Measured range | 30-70mm | ||
| Minimum spot size | 4.5 mm×4.5 mm，Measurement range 50mm | ||
| Response time | 200 μs/500 μs/1 ms/10 ms/100 ms/ 500 ms, Switchable | ||
| Light source | White LED | ||
| Interference reduction | Set different frequencies. Support two sets | ||
| Timer | Off/Switch on Delay/Switch off Delay / Single time | ||
| Communication methods | IO、RS485 | ||
| Power supply | Voltage | 10~30 VDC ,including±10% ripple (P-P),class 2 or LPS | |
| Current | ≤60 mA, 24 VDC (without load) <110 mA, 12 VDC (without load) | ||
| I/O | Control output | PNP/NPN Open Collector, switchable N.0./N.C.switchable | |
| External input | Calibration/stop lighting, switchable Short circuit current: NPN:≤ímA / PNP:≤2 mA | ||
| Protection circuit | Power reversed connection protection, power surge protection, output overcurrent protection, output surge protection, output reversed connection protection | ||
Environmental resistance | Waterproof | IP67 | |
| Ambient light | Incandescent light: s10000 lx; Sunlight: s20000 lx | ||
| Ambient humidity | -20〜+50℃（No freezing） | ||
| Relative humidity | 35〜85%RH（No condensation） | ||
| Shock resistance | 1000m/s 2 ,6 times each in X, Y, and Z directions | ||
| Vibration resistance | 10~55Hz,1.5mm double amplitude for 2 hours each in X, Y, and Z directions | ||
| Materials | Shell: Aluminum alloy, with surface free of copper, nickel, and zinc | ||
| LED Indicator cover:PC/PMMA | |||
| Button:PC+ABS | |||
| Lens cover: glass; Display cover plate: PMMA with coating to prevent damage | |||
Cable: PVC, load temperature 30-50 'C, high voltage test 300V (AC) leakage current not exceeding 2mA, insulation test 300V (DC) insulation resistance not less than 20M Q, with shielding (maximum length:10 meters) | |||
| Weight: 107g, including cables | |||